Tools Page 2
TOOLS - CLOCKMAKERS BROACHES & BURNISHERS
Cutting & Smoothing Broaches complete with plastic handle used for opening out pivot holes in clock plates and similar operations.
The Smoothing Broach will burnish the hole thus reducing friction and increasing pivot life.
Supplied in sets of 6. Some larger cutting Broaches supplied individually. See below.
|
CUTTING BROACHES
Sizes 0.40 - 1.40 mm Wallet Cutting JMW-638
Sizes 0.60 - 2.00 mm Wallet Cutting JMW-639
Sizes 0.70 - 3.00 mm Tube Cutting JMW-640
Sizes 1.20 - 3.00 mm Tube Cutting JMW-641
Sizes 2.20 - 6.00 mm Wallet Cutting JMW-642 |
SMOOTHING BROACHES
Smoothing JMW-643
Smoothing JMW-644
Smoothing JMW-645
Smoothing JMW-646
Smoothing JMW-647 |
| |
|
LARGE CUTTING BROACH
These large cutting Broaches are excellent quality and indispensable when enlarging barrel and fusee arbor pivot holes.
SIZES:-
JMW-648 3.0 - 4.0 mm
JMW-649 4.1 - 5.5 mm
JMW-650 5.6 - 7.0 mm
JMW-651 7.1 - 8.0 mm
JMW-652 8.1 - 9.2 mm
JMW-653 9.3 - 10.5 mm |
| |
|
PIVOT FILE & BURNISHER
This tool is essential when either making new or re-finishing worn pivots. It is a double ended with a fine file at one end and a burnisher
at the other. Supplied either left handed or right handed as shown, depending on how the clockmaker prefers to work. |
| |
|
LEFT HAND
OR OVERHEAD -
JMW-654 |
RIGHT HAND
OR UNDERHAND -
JMW-655 |
| |
|
FLAT FILE BURNISHER
This is a very useful tool. Cut 6 on one side and smooth for
burnishing on reverse. JMW-656A 4" - JMW-656 6"
OVAL BURNISHER
For burnishing edges of wheel crossings & similar operations. It will impart a mirror finish to the work.
JMW-658 4" long
JMW-659 5" long
|
| < Back |
|
|
